
Shelly Flush-mounted accessories "Plus Add-on" for Plus, Gen3 & Gen4 relays
Can be used with up to five DS18B20 sensors or one DHT22 sensor. There is an analog and a digital input DS18B20 - Temperature sensor (up to 5); Please select the product variant with or without (standard variant is delivered without) DHT22 sensor - if you need temperature and air
Availability: In stock
["Kann verwendet mit bis zu five DS18B20-Sensoren oer einem DHT22-Sensor werden Werden einen analogen und einen digitalen Eingang DS18B20 - Temperature sensor (up to 5); Bitte wählen Sie die Produktvariante mit oder ohne (Standardvariante wird ohne geliefert) DHT22-Sensor – wenn Sie Temperatur und Luftfeuchtigkeit überwachen mochten Shelly Plus Add-on ist eine galvanisch separaten Sensorschnittstelle für alle Shelly Plus Relais. Use the Add-on to measure temperature and humidity via its 1-Wire connectors or connect different analog and digital sensors for complex automation and higher efficiency. The Shelly Plus Add-on is compatible with the most Arduino-Sensor! Use the digital or analog inputs to create your desired parameters for the measurement and complex automation scenes based on the sensor data. You can connect a Reed Switch Sensor to the digital Sensor of the Shelly Plus Add-on and track the Status of your Garage door. In this way, you always know whether it is open or closed, and you can react accordingly. Erhzen Sie Ihr Wasser auf eine optimum Temperatur Decken Sie Ihren täglichen Bedarf, ohne etwas zu verschwenden! With the Shelly PM-Relais, you can determine the optimal energy requirement for heating the water in your instantaneous water heater. In conjunction with a temperature sensor, the Shelly Relay can automatically switch off the continuous heater when the optimum temperature is reached. Zusammen mit einem LDR (Fotowiderstand), the Shelly Plus Add-on can enable the Shelly Plus 2PM to close the Jalousie when direct sunlight auf Ihre Fenster scheint und den Raum aufheizt. Auf diese Weise muss die Klimaanlage die Heat nicht durch erhöhten Stromverbrauch ausgleichen und spart somit Energie. Und machen Sie sich keine Sorgen über den Verlust des angemengen Tageslicht! As soon as the Sun changed its position, the Jalousie automatically opened again. The motorized outer awning offers its guests an pleasant shade on the sunny day. A strong, uncontrollable wind can cause irreparable damage. Due to the combination with a wind sensor connected to the Shelly Plus Add-on, the Shelly Plus 2PM can automatically close the outer awning to protect against the wind. In addition, the Shelly Plus Add-on with a rain sensor allows the Shelly Plus 2PM to open the awning in time to protect its guests. A beautiful garden is not a easy task, and the automation of your irrigation system can save you time and save you money. Zusammen mit einem Bodenfeuchtigkeitsensor kann Shelly Plus Add-on den Shelly Plus 1 dazu veranlassen, die Bewersäung nur bei Bedarf einzuschalten und die Raintage auszulassen. Shelly Plus Add-on can also be connected to an einen Bewegungsmelder to illuminate rooms that are used in the house. Wenn Sie den Raum betreten, geht das Licht as lange an wie Sie es brauchen. 37x42x15 ±0.5 mm / 1.46 x 1.65 x 0.59 ±0.02 in SHELLY PLUS DEVICE FIRMWARE CAPABILITIES Shelly Plus 1/1PM, Shelly Plus 2PM, Shelly Plus i4/i4DC -15 V to 0.5 V (True) / 2.5 V to 15 V (False)*", "Can be used with up to five DS18B20 sensors or one DHT22 sensor", "Has an analog and a digital input", "DS18B20 - temperature sensor (up to 5); Please select the product variant with or without (standard variant is delivered without)", "DHT22 sensor – if you want to monitor temperature and humidity"]
Specifications
| Size (HxWxD) | 37x42x15 ±0.5 mm / 1.46 x 1.65 x 0.59 ±0.02 in |
| Weigh | 105 g / 3.70 oz |
| Shell material | Plastic |
| Color | Black |
| Ambient temperature | -20 °C to 40 °C / -5 °F to 105 °F |
| Humidity | 30 % to 70 % RH |
| Max. altitude | 2000 m / 6562 ft |
| Power supply voltage AC | N/A |
| Power supply voltage DC | 3.3 V (from Shelly plus device) |
| Power consumption | < 0.5 W (without sensors) |
| VCC max. current | 10 mA |
| VREF OUT max. current | 1 mA |
| Shelly Plus Addon supporting devices | Shelly Plus 1/1PM, Shelly Plus 2PM, Shelly Plus i4/i4DC |
| Temperature reading | Depends on the DS18B20 or DHT22 sensors |
| Humidity reading | Depends on the DHT22 sensor |
| Digital input | -15 V to 0.5 V (True) / 2.5 V to 15 V (False)* |
| Analog input range | 0 to 100% |
| Analog input report threshold | 1%** |
| Voltmeter range | 0 to 10 V |
| Voltmeter report threshold | 0.1 V** |
| Analog input / Voltmeter accuracy | Better that 5% |
Follow Us
We make consolidating, marketing and tracking your social media website easy.
Sign Up To Newsletter
Join 60.000+ subscribers and get a new discount coupon on every Saturday.

Add a review
Your email address will not be published. Required fields are marked *