More than just an access point - get to know Mikrotik SXTsq 5 ax This device was designed with real conditions in mind - it works stably even in urban environments with a high level of interference, while maintaining high throughput in the 5 GHz band. SXTsq 5 ax is the first external CPE that supports the Wi-Fi 6 standard, giving a noticeable leap in performance. The 16 dBi gain accelerates the point-to-point connection up to 10 km, maintaining good sensitivity even with a weaker signal. Efficient antenna and 16 dBi gain The integrated 16 dBi antenna allows for effective connections up to 3 km in urban conditions and up to 10 km in a straight line. The 2x2 MIMO antenna operates in the 802.11a/n/ac/ax standard in the 5 GHz band, providing throughput up to 1200 Mbit/s. This CPE device will work both as a signal receiver and a transmitting point. Wi-Fi 6 in external edition SXTsq 5 ax is Mikrotik's first external CPE with Wi-Fi 6, which means higher performance with more devices and lower latency. Thanks to the QCN-6102 chipset, the device ensures stability even in interference conditions. The new generation of the wireless radio standard increases range, bandwidth efficiency and real speed. PoE power supply and low consumption Mikrotik SXTsq 5 ax is powered by passive PoE (12-28 V), which significantly facilitates outdoor installation - one LAN cable with power is enough. The device consumes a maximum of 6 W, which makes it energy efficient and easy to integrate into existing infrastructure. The set includes a 24 V power supply and a PoE injector, so you don't have to look for additional elements. Gigabit port and RouterOS v7 There is 1x gigabit Ethernet port on board, which allows you to fully use the capabilities of the radio link. The RouterOS v7 system with a level 4 license allows flexible configuration - both as a client, bridge, access point and point-to-point device. This is equipment for a specific application, with the ability to adapt settings to network requirements.