["The ALLNET ALL-BM310 is a G.fast master modem, which, in combination with an ALL-BM300, can provide you with network & Internet quickly and easily via 2 twisted pair cables. The bridge modem is simply connected to a broadband router, firewall PC or MAC; no further settings are necessary. The network is transmitted 1:1 transparently, i.e. VLAN settings on the upstream switch are also passed through. In general, the shorter the copper cable, the higher the signal quality that arrives at the subscriber connection and the higher the speed that is possible", "G.Fast Bridge Master Modem", "Integrated splitter for simultaneous operation of analogue telephones and g.fast via the same cable", "Network via 2 twisted wires in combination with ALL-BM300 slave modem (modem is required separately - please note our ALL-BM320 bundle here", "Max. cable length = 500m, highest expected bandwidth 1GBIT/s (for more information see “expected transmission speed” below", "Compliant with IEEE 802.3 / 802.3u / 802.3ab Ethernet standard", "Compliant with ITU-T G.9700/G.9701 G.fast standard", "Support 212a G.fast band profile", "Support High Bandwidth up to 1Gbps", "Support USB 3.0 for connecting USB dongle", "Support HTTP/HTTPS web management", "Support remote management and monitoring", "Support configuration backup and restore", "On board surge protection for line port", "Support bridge(switch) ALL-BM310 Master only)", "Support RJ-11/Terminal block combo line port", "Support NTP Time Server", "Support TR-069", "On board POTS analogue telephone splitter", "Support Jumbo frame(MTU) up to 1600 bytes", "IEEE802.3/802.3u/802.3ab standards", "ITU-T G9700/G9701 standards", "4 x RJ-45 10/100/1000 Mbps Ethernet port", "1 x RJ-11 / Terminal block combo for line port", "1 x RJ-11 connector for POTS analogue phone device", "1 x Reset Button for resetting to factory default", "1 x Power LED", "4 x Link/Active Status for Ethernet port", "1 x Link LED for G.fast mode", "1 x Link LED for xDSL mode", "FCC", "RoHS Compliant", "1x ALL-BM310", "1x 12V/2A power supply included", "1x patch cable", "1x RJ11 to RJ11 Cable", "1xQIG"]