
ALLNET Powerline 1200Mbit HomePlugV2 "SmartLink" MIMO mit WiFI AC ALL1681211v2
With the ALL1681211v2 adapter, the first ALLNET powerline adapter according to the HomePlug AV2 standard with Smartlink 1200 Mbps and MIMO with an additional integrated wireless AC access point comes onto the market. The ALLNET ALL1681211v2 uses the latest Qualcomm Atheros QCA7500 / QCA8334 chipset.
Availability: In stock
["With the ALL1681211v2 adapter, the first ALLNET powerline adapter according to the HomePlug AV2 standard with Smartlink 1200 Mbps and MIMO with an additional integrated wireless AC access point comes onto the market. The ALLNET ALL1681211v2 uses the latest Qualcomm Atheros QCA7500 / QCA8334 chipset. It has two Gigabit Ethernet RJ45 interfaces and is compatible with the powerline standards IEEE1901/Homeplug AV and GreenPHY. This enables easy use with existing Powerline devices from other manufacturers. High data rates and Quality of Service (QoS) enable the use of HD multimedia applications and help you realize high-speed digital multimedia home networks throughout the home, including IPTV services, simultaneous HD video and audio distribution, voice over IP calls, online gaming, high speed Internet. The ALL1681211v2 offers simple plug & play networking via a push button, without the need for software configuration. The Network Management Key (NMK) with its 128-bit AES hardware encryption ensures secure, authenticated access to the logical network and protects the network from hackers. The integrated wireless IEEE802.11ac dual-band access point delivers 2.4GHz (max. 300Mbps) and 5GHz (max. 867Mbps). In order to meet the requirements for modern Green IT products, the ALL1681211v2 complies with the European Code of Conduct (CoC) for improving energy efficiency and the Energy using Products (EuP) Directive of the European Union. The new HomePlug AV2 standard enables highly efficient data transmission on the power cable with technologies such as Efficient Notching & High Efficiency PHY Protocoll Data Unit (PPDU) Structure. The new ALL1681211v2 now also offers an integrated protective contact socket that is looped through in a filtered manner. i.e. the end devices that are connected behind these integrated filtered sockets do not interfere with the Powerline transmission signal. So there are 2 advantages:", "2in1 1200Mbit Powerline & Wireless AC Access Point", "New HomePlug AV2 standard", "Up to 1200 Mbps Powerline data transfer rate via Powerline", "Compatible with other HomePlug AV technologies", "MIMO support", "2x Gigabit Ethernet ports", "Integrated Wireless AC/abgn 2x2 Wireless AC access point", "Integrated filtered protective contact socket with 16A, also known as “passtrough”.", "Easy installation", "From firmware version 1.0.76 the following is supported: 1.EAP authentication (802.1x) : PEAP MSCHAPV2 ; 2. Roaming capable IEEE802.11r firmware can be obtained by clicking on this link support@allnet.de", "They do not occupy dedicated sockets in the wall", "The devices behind it do not disturb the stability of the powerline"]
Specifications
| Product | ALL1681211v2 PLC 1200M & 1200Mbps 802.11ac Dual Band Wireless Gigabit |
| Interface | LAN Port: |
| Power Port | 1X POWER (AC) interface |
| Antenna | Gain: |
| Button | 1 x Factory Default / WPS button 1 x PLC button Pairing |
| LED indicators | WiFi PLC |
| Material | Plastic |
| Transfer frequency band | 2-68Mhz |
| Dimensions (W x D x H) | 70x43x126mm(without plug) |
| Weight | 0.35KG |
| Power Requirement | AC85-260V |
| Power Consumption | Maximum W/A:10.3/0.15 Typical W/A:8.0/0.12 Stand-By W/A:2.1/0.11 |
| Standard | IEEE 802.11ac 5GHz IEEE 802.11a/n 5GHz IEEE 802.11b/g/n 2.4GHz |
| Frequency Band | Simultaneous 2.4GHz and 5GHz |
| Modulation Type | 802.11ac: OFDM (BPSK / QPSK / 16QAM / 64QAM / 256QAM) 802.11a/g/n: OFDM (BPSK / QPSK / 16QAM / 64QAM) 802.11b: DSSS (DBPSK / DQPSK / CCK) |
| Data Rates | 2.4GHz up to 300Mbps 5GHz up to 867Mbps HomePlug: PHY rate:1200Mbps TCP/IP rate: 550Mbps |
| Channel | 2.4GHz FCC (America): 2.412~2.462GHz (11 Channels) ETSI (Europe): 2.412~2.472GHz (13 Channels) |
| Channel Width | 802.11ac: 20/40/80MHz 802.11n: 20/40MHz |
| Max. RF Power / EIRP | 2.4GHz: < 20dBm 5GHz: < 20dBm |
| Receive Sensitivity | 2.4GHz 11b (11Mbps): -79dBm 11g (54Mbps): -68dBm 11n (20M) mode: -67dBm 11n (40M) mode: -64dBm |
| SSID | 2.4GHz: 1 Root SSID and 4 Guest SSID 5GHz: 1 Root SSID and 4 Guest SSID |
| Encryption Security | WEP WPA/WPA2 personal mixed mode |
| Wireless Security | Wireless ACL MAC address filtering |
| Max. Supported Clients | 2.4GHz wireless: 32 5GHz wireless: 32 |
| IEEE Standards | IEEE 802.11n (2T2R, up to 300Mbps) IEEE 802.11g IEEE 802.11b IEEE 802.11i IEEE 802.3 10BASE-T IEEE 802.3u 100BASE-TX |
| Regulatory | CE, RoHS, WEEE |
| Temperature | Operating: 0 ~ 40 degrees C Storage: -40 ~ 70 degrees C |
| Humidity | Operating: 10 ~ 90% (non-condensing) Storage: 5 ~ 95% (non-condensing) |
| From firmware version 1.0.76 the following is supported | 1.EAP authentication (802.1x) : PEAP MSCHAPV2 ; 2. Roaming capable IEEE802.11r firmware can be obtained by clicking on this link support@allnet.de |
| LED Indicators | WiFi PLC |
Follow Us
We make consolidating, marketing and tracking your social media website easy.
Sign Up To Newsletter
Join 60.000+ subscribers and get a new discount coupon on every Saturday.

Add a review
Your email address will not be published. Required fields are marked *