Nanostation 5GHz in/out

Features Ubiquiti Nanostation M 5 GHz5 GHz WiFi frequency according to 802.11a/nMaximum wireless speed of 150 MbpsCan be used in point to point WiFi setup1x 100 Mbps network connection with PoE input1x 100 Mbps network connection with PoE output (24V, 500mA)16 dBi antenna gain, 27 dBm power (H43°, V41°)Includes mast mounting brackets and PoE power supply

Point to Point WiFiThe Ubiquiti Nanostation M is intended for setting up Point to Point WiFi setups where you can connect two buildings wirelessly. This setup is often used to connect two networks at different locations or to set up a backup internet connection. The Ubiquiti Nanostation operates at 5 GHz, can achieve a maximum speed of 150 Mbps and works according to the 802.11a/n WiFi standard.Power and connectionsThe Ubiquiti Nanostation M has a maximum power of 27 dBm, which is a lot higher than the average outdoor WiFi access point. This allows greater distances to be bridged. The internal antenna in the Nanostation also offers a gain of 16 dBi for an extra high total power. With a clear view, distances of up to 500 meters can be achieved, but we always recommend that you contact our WiFi experts for advice regarding your specific situation.Network connectionsThe Ubiquiti Nanostation M has two network connections that allow you to connect the access point to your router or switch. The second network port can be used to daisy-chain the access point to a possible second unit.Power over EthernetThe access point receives network data via its network connection and is also supplied with power via this connection. The Ubiquiti Nanostation M uses Power over Ethernet for this. A major advantage of Power over Ethernet power supply is that you do not need power directly near the access point, you can power the access point with a network cable of up to 30 meters. A PoE adapter is supplied as standard with the access point.Package contents

• Ubiquiti Nanostation M (NSM5)
• Power over Ethernet supply 24V 0.5A
• 2x Mounting strips
• Manual