Shelly Dimmer 0/1-10V PM Gen3 | Smart dimmer | WiFi, Bluetooth, 0/1-10V, with power measurement |

Shelly Dimmer 0/1-10V PM Gen3 - Functional management of light intensity in a smart home Shelly Dimmer 0/1-10V PM Gen3 is an advanced and functional controller designed for precise lighting management. The device allows you to control 0-10V and 1-10V controllers, which are used in professional LED systems, engines and valves. Thanks to Wi-Fi and Bluetooth connectivity, the module integrates with the smart home system without the need for an additional hub. Gen3 is the smart choice for those looking for a stable solution that allows you to dim light sources while precisely measuring the power of the connected load. Gen3 series performance and precise energy consumption measurement The Gen3 series introduces the new Shelly ESP32 C3 processor and 8 MB flash memory to the Shelly Dimmer, which translates into smooth operation and stable script support. The device has a built-in mechanism that allows you to monitor energy consumption, providing data on voltage, current and active power. The Shelly dimmer supports Bluetooth 4.2 connectivity, acting as a gateway for other BLU devices. For proper operation, the module requires a neutral wire to be connected, which ensures stable current flow and the safety of the entire electrical installation. Practical use and intelligent night mode This light dimmer is helpful in modernizing traditional installations, allowing you to control the brightness using the Shelly Smart Control app or a physical button. A special night mode allows you to define a lower lighting brightness in the evening, which is very practical in bedrooms or corridors. The device is fully compatible with voice assistants such as Alexa and Google Home. Thanks to this, you can adjust the light intensity using simple commands, which increases the comfort of using the smart home system. Lighting automation and integration with Home Assistant Shelly Dimmer 0/1-10V PM Gen3 allows you to operate an advanced work schedule, adjusting the lighting to the times of sunrise and sunset. Thanks to support for MQTT and Webhooks protocols, deep integration with Home Assistant and other automation systems is possible. Shelly Plus Add-on can be connected to the dimmer, which allows you to include an additional temperature or humidity sensor in the system. Such automation makes the system more efficient and tailored to the current needs of users. Stable operation and compliance with the Matter standard As a modern controller, Shelly Dimmer 0/1-10V PM Gen3 provides remote access to devices from anywhere in the world. The module has been designed in accordance with the Matter standard, which is intended to enable seamless cooperation with many smart building ecosystems. Safety of use is increased by built-in protection against overvoltage, overload and overheating. Wi-Fi connectivity with a range of up to 30 meters inside buildings guarantees signal stability, eliminating the need to install a hub, which simplifies the entire smart home architecture. Technical data Parameter Value Power supply 110-240 V ~ 50/60 Hz Control type 0-10V / 1-10V (Current sourcing) Shelly ESP32 C3 processor (8 MB Flash) Connectivity Wi-Fi 802.11 b/g/n, Bluetooth 4.2 Power measurement Yes (Voltage, Current, Active power) Maximum switching current 13 A (output relay) Operating temperature -20 °C to 40 °C Dimensions 38.5 x 43.5 x 17 mm Matter support Yes Key advantages Functional and precise measurement of energy consumption for full cost control. Support 0-10V and 1-10V drivers, suitable for LED lighting and motors. No need to use a hub - direct connection via Wi-Fi. Powerful Gen3 processor for fast response and script support. Full integration with Matter, Google Home, Alexa and Home Assistant. A practical night mode that ensures the visual comfort of household members after dark. The product is a proposition for owners of smart home systems looking for a stable 0-10V dimmer. People who want to precisely monitor the electricity consumed by lighting. Users of the Home Assistant platform and the MQTT protocol who need open solutions. Installers looking for recess modules with Matter and Bluetooth gateway support.

Download datasheet (PDF)