["DRAGINO LTC2-FT-EU868 LoRa Industrial Temperature Transmitter The Dragino LTC2 Industrial LoRaWAN Temperature Transmitter is designed for monitoring temperature in various environments. It supports reading out PT100 probes and converting the value into temperature and uplink to the IoT server via the LoRaWAN protocol. The LTC2 supports the data logging function. The user can get the sensor value via a LoRaWAN downlink command. The LTC2 is powered by an 8500mA Li-SOCI2 battery for long-term measurements. Battery life is 2 to 10 years depending on the network environment and work mode. Each LTC2 has two internal 16-bit ADC interfaces and is calibrated with 12 resistors to ensure measurement accuracy over a wide range. The LTC2 is compatible with LoRaWAN v1.0.3. Each LTC2 is pre-installed with a set of unique keys for LoRaWAN registration", "LoRaWAN v1.0.3 Class A", "max: 2 x monitor temperature channels", "Supports 3-wire PT-100", "8500mAh Li-SOCI2 battery", "Firmware upgrade via console", "Wall mountable", "Configurable via LoRa or UART", "Datalog and retrieval via LoRaWAN", "Using a pre-charged PT100 probe or a third PT100 probe", "Factory calibration for different resistance ranges", "Supports accuracy measurement of resistance and upload", "Battery monitoring and upload", "Logistics and supply chain management", "Food management", "Cold chain solution", "Industrial monitoring and control", "1 x LTC2 Industrial LoRaWAN Temperature Transmitter"]