With the 2wIP, a network connection can be established via a 2-wire cable. Here PoE is also transmitted on the line. The adapter is scalable, one transmitter can control up to 4 receivers. Cable length up to 1500m for coax, 500m for twisted pair or bell wire Transmission speed up to 180MBit/s Multiport, 1 transmitter can control up to 4 receivers PoE with up to 38 watts for all 4 receivers in total No programming for the basic configuration required, plug and play, plug in, it works. Grouping and monitoring via software Of course also works with SIP telephones, access points, computers, etc. Establishing the connection: Connect a 2wIP to the network switch using a patch cable, establish a 2-wire connection to the second (and third, fourth and fifth) 2wIP, connect in the bus system, note polarity. Plug the end device into the second 2wIP. Done, the transmitters and receivers configure themselves