["Gigabit network via 2-wire connection or telephone cable With the G.HN Gigabit Ethernet Bridge ALL-GHN101-2wire, you can expand your private network at home via the existing telephone line. No additional network cabling is necessary. You can simply use the existing telephone line in the wall. At a frequency of (6-76MHz) coexistence with ADSL and VDSL is NOT guaranteed. With the ALL-GHN101-2wire you can quickly expand your network without re-cabling and with little effort. ATTENTION: The g.hn 2wire version is designed for a point-to-point solution. It is NOT possible to set up several g.hn connections in a multi-wire cable. These couples would annoy each other. In electronics, this is called crosstalk/countertalk. If you use multi-wire bundle systems, ALLNET also has VDSL2 vectoring technology in its portfolio. G.hn: Two RJ-11 Connectors, One for G.hn, the other for Phone-Line Bypass PHY measured rate: 60m: 251 MBit/s, 100m: 241 MBit/s, 200m: 201 MBit/s, 300m: 92 MBit/s, AES 128 Encryption Working temperature: 0° ~ 50° (32° ~ 120°) Storage temperature: -10° ~ 65° (14° ~ 149°) Humidity: 10% ~ 95%, Non-condensing Operating temperature: 0°C ~ 50°C (32°F ~ 122°F) Storage temperature: -20°C ~ 70°C (-4°F ~ 150°F) Humidity: 10 to 90% (non-condensing)", "Up to 500Mbps G.hn port as a home network backbone from one of the existing telephone lines", "Two 100/1000Mbps Gigabit Ethernet ports for FTTH, DSL/cable modem and Ethernet terminals (PC, set-top box, ...)", "Energy efficiency (green) Ethernet support", "A maximum distance up to 350 meters via G.hn Port", "Built-in analog telephone splitter to be able to operate broadband and telephony at the same time", "Indication of signal quality", "6~76Mhz feed frequency therefore NOT compatible VDSL and G.HN over the same CABLE"]