["With the ALL-MC116VDSL2 modem, ALLNET is bringing a pure VDSL2 single port bridge onto the market that meets the basic requirement of a high-performance point-to-point connection using a 2-wire connection - typically a telephone connection - with all the advantages of a VDSL2 connection. The modem has both RJ11 sockets and terminal sockets for pure wire connections. The additional option of grounding the devices (with the ALL95100 lightning protection) provides the necessary protection against lightning strikes in the area of ​​application. Two gigabit ports connect the modem to the network. The new ALL-MC116VDSL2 now also has an optional Gigabit SFP slot to expand communication with copper or fiber GBIC modules if necessary. The ALL-MC116VDSL2 can be configured quickly and easily using the DIP switch as either a master or slave modem. There are numerous LEDs on the front of the device for visual signaling of the operating states and connections. DC 12V via AC switching adapter (including) 124 x 93 x 27 mm (4.88\" x 3.66\" x 1.06\") 0~50° C (Operating Temperature) -20~70° C (Storage Temperature) 10 - 90% (non-condensing Humidity) 1x ALL-MC116VDLS2 modem 1x external 12V power supply 1x manual", "VDSL2 modem can be set as master or slave", "Simple 2-wire connection for point-to-point connection", "Up to 160 Mbit/s symmetrical for up to 3km (cable dependent)", "2x RJ45 10/100/1000Mbps Ethernet ports", "NEW: 1x 1000 Base-X SFP slot for optional SFP modules", "also available as a practical bundle of two", "Optional DIN rail adapter: Art. 102424", "Supports jumbo frames (2K bytes MTU)", "Selectable G.INP mode", "Selectable 8-band profile"]