["The ALL-MC116SPV-VDLS2 is a cost-effective unmanaged VDSL2 bridge modem with an integrated 2x port PoE switch according to IEEE802.3at with max. 30W per PoE port. Uses the G.993.2 VDSL2 standard technology for data transmission on just one pair of copper cables. Data transmission via just a single pair of copper cables. The ALL-MC116SPV-VDSL2 was developed specifically to support the vectoring function for Telcom & ISP through to hospitality solutions for operation on DSLAMs. The modem is therefore compatible with standard VDSL2 up to 100Mbit VDSL2 connections. The modem has 2x 10/100/1000Base-T Ethernet ports with PoE IEEE802.3at max. 30W per port. PoE budget = 60W. This extender therefore offers a flexible solution for expanding the LAN network and is perfect for use in buildings, hotels, hospitals or other locations outside the range of 10/100/1000Base-T (Ethernet). Above all, the vectoring technology distinguishes the ALL-MC116 SP V-VDSL2 from its brothers in that it is intended for a vectoring connection to a DSLAM, regardless of whether it is later used for provider ISP or in-house DSLAM. Important to note, this is an unmanaged device. With unmanaged bridge modems you have NO chance of reading the bandwidth or setting VLAN tags etc. Of course you can read the data on your DSLAM as it has been synchronized. The 2x PoE ports according to IEEE802.3at with max. 30W per port are now ideal for operating PoE devices such as WLAN access points or PoE tablets through to patient monitors or other end devices in hospital rooms/hotel rooms/nursing homes etc. at the same time on the two ports. DC 54V AC to DC Medial compliant IEC/EN/UL60601-1 1x MOPP switching adapter (including) AN:Act/Link, PoE, Overload VDSL2: Act/Link, Line Mode: CO/CPE 137 x 100 x 27 mm (5.39\" x 3.94\" x 1.06\") 0~50° C (Operating Temperature) -20~70° C (Storage Temperature) 10 - 90% (non-condensing Humidity) 1x ALL-MC116SPVDLS2 modem 1x external medial compliant IEC/EN/UL60601-1 1x MOPP power supply 1x manual", "Cost-effective VDSL2 Ethernet unmanaged bridge modem", "Supports VDSL profiles 8a, 8b, 8c, 8d, 12a, 12b, 17a", "Supports 1000Base-X SFP slot", "Supports ITU-T G.993.5 vectoring", "Supports G. INP", "Supports UPBO & DPBO", "Supports compact size and DIN rail mounting (optional holder, see accessories)", "2x Gigabit ports with PoE according to IEEE802.3at max. 30W per port. = Budget 60W", "Included PoE power supply which meets medical certification IEC/EN/UL60601-1 1x MOPP"]