Features Ubiquiti PowerBeam AC ISO Gen2

Point-to-point access point (5GHz)RF isolating housing protects against interferenceNot sensitive to disturbing environmental signalsWith WiFi radio, only for connection with mobile deviceRemote management with UMobile appMaximum transmission power of 24 dBmWiFi standard 802.11ac at 450 MbpsGigabit LAN port with PoE for network and powerEasy installation, including mast brackets400mm dish shape, 5 GHz with 25 dBi gainWorks with free Ubiquiti spectrum analyzer softwareQoS for video streaming and VoIP

PowerBeam AC with RF isolator

The Ubiquiti PowerBeam AC ISO Gen2 is specially designed for busy environments with many RF signals. The point-to-point access point has a special RF isolator that filters noise and provides optimal protection against interference. The PowerBeam AC ISO Gen2 also emits a highly targeted signal, making it even better able to filter out disturbing environmental signals.

Perfect solution for point-to-point WiFi

The Ubiquiti PowerBeam AC ISO Gen2 is an excellent solution, intended for setting up a point-to-point WiFi connection. This way you can connect two nearby buildings by aligning two of these units against each other. You intelligently share one internet connection and ensure that each branch has a backup connection. And that completely without cables.

Power supply and network

The Ubiquiti PowerBeam AC ISO Gen2 has 1 Gigabit LAN connection with Power over Ethernet (PoE) support (PoE injector 24V, 0.5A PoE required). The unit can be supplied with both power and network connection via the network cable, which is ideal for locations where there is no power socket available. The dish has a diameter of 500mm and can be adjusted as desired. You can read the signal strength using the integrated LEDs and thus determine the best position for the device. A bracket for mast mounting is included as standard.

AirOS for easy management

You can easily install and manage the access point via Ubiquiti's AirOS software. It is also possible to monitor the throughput speed and link status of your connections. Using the free spectrum analyzer software you can quickly detect any malfunctions. The software shows you on which channels within the 5 GHz spectrum equipment is active. Thanks to this software you can always choose the right channel so that your connection will achieve optimal results.

AirControl and UMobile app

Ubiquiti AirControl allows you to manage your entire Ubiquiti network from the cloud. This way you can easily roll out firmware updates for all your access points and you have a handy overview of all your equipment. In addition, the PowerBeam AC ISO Gen2 contains a separate WiFi radio for connection with the UMobile app on your mobile phone or tablet. You can easily manage and configure the access point remotely via the UMobile app (iOS and Android).

No seamless roaming

Ubiquiti's access points do not support seamless roaming. The access points you are looking at are also only suitable for point-to-point solutions and not as an access point for a daily WiFi network. If you are looking for an access point that supports seamless roaming, take a look at the products fromRuckus WirelessorAerohive.

Package contents

• Ubiquiti PowerBeam AC ISO Gen2 (PBE-5AC-ISO-Gen2)
• PoE injector
• Fastening material
• Adjustment screws
• Mounting brackets
• Manual