EXTRALINK PLC 1:4 2.0mm fiber optic splitter with SC/APC connectors Fiber optic splitters are used in FTTH networks in which the Internet is delivered to customers via optical fiber. It is carried out from the server room to the client device without changing the transmission medium. The specific nature of this technology requires that the signal be distributed to clients without the use of additional active devices. PLC splitter with symmetrical power division 1:4 with connectors both at the input and output. The ABS housing allows safe installation in racks or external fiber optic cabinets. The splitter is built on a patchcord cable reinforced with aramid fibers, the outer diameter of which is 2.0 mm, enabling safe laying of optical fibers in rack-mounted distribution boxes. G657a fibers are used for production, providing greater bending resistance through a reduced bending radius. Fiber optic installations based on fiber optic cables and splitters can be laid where electric wires, copper structured cabling or other connection cables are located without fear of interference. A bus cable is connected to the splitter's input, and a round FTTX fiber-optic subscriber cable can be connected to each of the outputs, which we use to connect network clients. The product is packed in blisters to prevent cables from tangling. The splitter is built on a 2.0 mm patchcord cable, so it can be safely placed in distribution boxes and cabinets. The product is packed in blisters to prevent cables from tangling.