["GaN stands for the material gallium nitride, which is increasingly being used for semiconductors in chargers. The advantage of GaN over silicon chargers is that it generates less heat. Less heat means components can be placed closer together without compromising performance capacity and in accordance with safety standards. The charging process is accelerated because the electrical current can pass through the GaN components more quickly. The name QC stands for QuickCharge® from Qualcomm®, which supports the power supply. PD is an intelligent management technology that enables so-called PD chips in active power cables and devices to always transmit the permitted voltage and current. It contributes extremely to safety and devices and cables can no longer become overloaded and hot. Very high-quality power supply with PD USB-C for all modern devices with high-speed charging, e.g. Quad SATA kit for Raspberry Pi 4, Rock Pi, smartphones, tablets, netbooks and notebooks or all other devices that can be charged via USB Type-C or PD. Please use a high-quality USB-C cable from the accessories, this is crucial so that the correct power can be transmitted. Our USB-C cables are active with PD chip and can transmit data speeds of 10Gbit (USB3.2 and Thunderbolt3) - 40Gbit (USB4.0 or Thunderbolt4) and a power of up to 20V/5A", "Input:100-240V~50/60Hz,1.5A", "USB-C1/C2 Output:3.3V-11V/3A or 5V/3A or 9V/3A or 12V/3A or 15V/3A or 20V/3.25A(65W Max)", "USB-A1/USB-A2 Output:4.5V/5A or 5V/4.5A or 9V/3A or 12V/2.5A or 20V/1.5A(30W Max)", "USB-C1+USB-C2 Output:45W+20W(65W Max)", "USB-C1+USB-A1 Output:45W+18W(63W Max)", "USB-C2+USB-A2 Output:45W+18W(63W Max)", "USB-C1+USB-A2 Output:45W+18W(63W Max)", "USB-C2+USB-A2 Output:45W+18W(63W Max)", "USB-A1+USB-A2 Output:5V/3A 15W", "USB-C1+USB-C2+USB-A1 Output:30W+20W+18W(68w)", "USB-C1+USB-C2+USB-A2 Output:30W+20W+18W(68w)", "USB-C1+USB-A1+USB-A2 Output:45W+15W", "USB-C2+USB-A1+USB-A2 Output:45W+15W U", "USB-C1+USB-C2+USB-A1+USB-A2 Output:30W+20W+15W", "PPS/PD3.0/PD2.0 ,QC4+/QC4.0/QC3.0/QC2.0, PE2.0,PE1.0, AFC,FCP,SCP,SFCP"]